Really puzzled about this, maybe someone can point me in the right direction as to how to fix it.
Magic seemed to run fine, although I didnt pay too much attention to the progress which may be my downfall!
Upon rebooting, i could only select the DVD boot icon, seems like the loader won't detect anything on the hard drive. I tried using a stardust cd just so i could get back in Gentooz but it failed at reading the initrd.gz file (dont think its a problem with the media though )
Currently messing with rescootx, have tried reflashing the bootloader back to a previous version but has no effect. Incidentally the main screen has always shown v4.7 regardless of what bootloader image i flash. Is this normal or am I making a stupid mistake with the flash process?
If someone could give me some pointers as to how to get back into Gentoox I'd be grateful. Currently looking at the linuxboot.cfg file and the syntax looks the same as the new format thats been implemented ie "
title Gentoox
kernel vmlinuz
initrd initrd.gz"
Does this need to be "downgraded" so I can get back in?
Thanks in advance for any advice given
unable to boot after upgrading bootloader through magic
-
- Linux User
- Posts: 13
- Joined: Mon Sep 13, 2004 8:16 pm
Sounds like you're making a stupid mistake flashing. The old bootloaders WILL NOT WORK with the new fileformat... so yes, until you can figure out how to flash, youll need to downgrade your linuxboot.cfg. To do this, delete all the sparkle section, then delete the "title Gentoox" line.
The original Xbox adaptation of Gentoo
-
- Linux User
- Posts: 13
- Joined: Mon Sep 13, 2004 8:16 pm
cheers
thanks for that!
Will do what you suggest, incidentally anyone using the xecutor 2.6 variety of modchip take note it might not upgrade properly with the normal procedure, unless im doing something completely brainless of course!
Will do what you suggest, incidentally anyone using the xecutor 2.6 variety of modchip take note it might not upgrade properly with the normal procedure, unless im doing something completely brainless of course!
You need to double up the BIOS since that modchip only has 512k banks. cat ./loader.bin ./loader.bin > ./512k.bin
or to make a full 1024k bios... cat ./loader.bin ./loader.bin ./loader.bin ./loader.bin > 1024k.bin
Be warned, this will wipe over EVERYTHING on your chip.
or to make a full 1024k bios... cat ./loader.bin ./loader.bin ./loader.bin ./loader.bin > 1024k.bin
Be warned, this will wipe over EVERYTHING on your chip.
The original Xbox adaptation of Gentoo
-
- Linux User
- Posts: 13
- Joined: Mon Sep 13, 2004 8:16 pm
-
- Linux User
- Posts: 13
- Joined: Mon Sep 13, 2004 8:16 pm
that did it!
Cheers for that Shallax
Doubled it up as you said and no probs, its flying now
Doubled it up as you said and no probs, its flying now
-
- Newbie
- Posts: 2
- Joined: Mon Jan 10, 2005 2:29 am
- Location: Maitland, FL
- Contact:
I am stuck with the same problem and need help...
I downloaded and burned Resctoox but after several tries it just comes up with:
and then it just hangs.
How do I get in to re-flash the bios and/or downgrade my linuxboot.cfg file?
I am an experienced Gentoo user but my knowledge of GentooX is pretty limited as I cheated and bought an XBox that already had GentooX installed.
--
BasketCase
I downloaded and burned Resctoox but after several tries it just comes up with:
Code: Select all
PCI: Failed to allocate resource 2(f8000000--f7ffffff) for 01:00.0
xpad.c: device 0x0c6f/0x2038 not recognized
How do I get in to re-flash the bios and/or downgrade my linuxboot.cfg file?
I am an experienced Gentoo user but my knowledge of GentooX is pretty limited as I cheated and bought an XBox that already had GentooX installed.
--
BasketCase
-
- Newbie
- Posts: 2
- Joined: Mon Jan 10, 2005 2:29 am
- Location: Maitland, FL
- Contact:
OK, I am getting a little bit farther...
Now in addition to the previous output I get:
Then it still hangs
It also hangs with the Stardust.iso image.
--
Kevin
Now in addition to the previous output I get:
Code: Select all
host/usb-ohci.c: USB HC TakeOver failed!
Trying to vfree() a nonexistent vm area (c5fc4000)
<repeat>
It also hangs with the Stardust.iso image.
--
Kevin