I currently have linux pro running on my xbox with a 200gb hard drive inside and is used just as a Samba server. I am currently running out of space and want to install another hard drive in the xbox in replacement for the dvd drive, there are a couple of questions i need to ask though.
a) What setting do you need the drive on (slave)
b) Does the current drive need to be formatted or anything or can this be left alone which is what i would prefer.
c) Is there a tut anywhere explaining how to do this as i am not exactly a pro at linux.
thanks in advance!
Running 2 hard drives!
you need to buy an y-splitter power cable to connect 2 harddrives... it cost about 30 SEK (swedish kronors) its about 4 dollars in a computer store. then it is good to go.
i have never had any problems with my box or hdd when i am running 2 disks instead of a disk and one dvd-rom.
the thing you heard about not anough power for 2 drives i think is a lie. just saying from my experience and my discs is running fine and never any problem with power supplie
i have never had any problems with my box or hdd when i am running 2 disks instead of a disk and one dvd-rom.
the thing you heard about not anough power for 2 drives i think is a lie. just saying from my experience and my discs is running fine and never any problem with power supplie
Maybe it depends on what drives you used or what version of xbox you have. Maybe they beefed up the PS in the newer models or something. Nice, though, I might consider doing the same with mine. I need more storage and I don't think I've used the DVD drive once since installation. Can always swap it back out if needed, too I guess. Or just leave the HDD in an external case.
Is it really just that simple, and then how i would i add it as another samba share, would i just add it using the letter that the drive is designated? thanks for the help peoplelidback wrote:i`m running 2 X 400 gigabytes hdd on gentoox with no problem.
just replace the dvd-rom with your other harddrive, and set the drive to slave.
then boot up gentoox run "fdisk -l" to check that all is working (you will se the other disk there). then just format it to linux partition and voila