Gentoox Loader Video Problem
Gentoox Loader Video Problem
Just booted up for the first time using this, and the output is garbled. The Cromwell (Xromwell, whatever!?) loader worked perfectly. I have a Conexant video encoder (v1.2 box), but I'm thinking the problem is with the HDTV pack. I'm running in standard 480i mode, however I haven't had a chance to test with standard A/V cables. I'm sure it's just a small bug, and since this was just released, not a biggie. I can still boot fine just by hitting enter.
I have no choice but to run in interlaced mode; I'm using component cables to a standard TV, otherwise I''d gladly run in a progressive mode. The reason I posted (and registered for that reason) is that the previous boot loader ran fine (the one bundled with Home v3.0c).
And to be clearer in the first post (can't tell if I was enough), video output is fine once past the bootloader. Just want to make sure that is clear.
And to be clearer in the first post (can't tell if I was enough), video output is fine once past the bootloader. Just want to make sure that is clear.
I know why the one bundled with home 3.0c worked.... there was no code for hdtv, it just forced the output as standard PAL/NTSC regardless of the AVPACK. I fear that once you upgrade your kernel, nothing will work at all. The problem is... as soon as the driver sees an HDTV AVPACK it shoots straight to 480p.
The original Xbox adaptation of Gentoo
-
- Newbie
- Posts: 5
- Joined: Tue Feb 03, 2004 9:25 am
- Location: Austin, TX
- Contact:
I've found out that the problem actually needs to be fixed in the xbv that is equipped in all xbox-linux distros. The only way to fix it would be to add an option to force linux to use an interlaced mode even though an HD pack is found, as some TVs do not support anything better than 480i (such as the Sony FSxxx models).
heh i had this problem because i loved using hdtvpack on my tv great video output. but with the latest video drivers composite cables work pretty good. alot better than before. heh i remember when focus came out and the av pack stopped working. it pissed me off so much that i hacked the old drivers together into the new kernel. just a matter of overwriting a few files. hehe probably not that easy anymore :\
your probably just stuck with composite
your probably just stuck with composite
I'm having this trouble too, using component cables into a standard tv through an AVPACK (and I don't want to have to use composite cables either!!!) How do I go about reinstalling the previous kernel (the one bundled in with home 3.0c) into my current installation. I've got a lot of stuff in it again now and I don't want to lose it all (again!) Admittedly, only through pure linux n00b ignorance!
Thanks
Pobster
Thanks
Pobster
-
- Gentoox Guru!
- Posts: 1681
- Joined: Sun Sep 28, 2003 11:59 am
- Location: Manchester, UK
-
- Newbie
- Posts: 1
- Joined: Sat Sep 18, 2004 1:30 am
I have to agree, I also output using component cables to a regular TV that just supports 480i. The picture is remarkably better with component than SVideo cables. So right now, I need to completely unplug and plug in different cables to use GentooX. I'm a complete newb to Linux (hoping to use this distro to learn new tricks), so I wouldn't begin to know where to contribute this code myself (480i support).
If someone has time, 480i Focus chip support would be greatly appreciated!
If someone has time, 480i Focus chip support would be greatly appreciated!