128 RAM
-
- Novice
- Posts: 37
- Joined: Wed Jun 02, 2004 2:45 pm
- Location: Norwich
- Contact:
128 RAM
Are you planning on upgrading your RAM?
Poll
Poll
-
- Adept
- Posts: 51
- Joined: Sat Jan 10, 2004 4:25 pm
- Contact:
-
- Novice
- Posts: 37
- Joined: Wed Jun 02, 2004 2:45 pm
- Location: Norwich
- Contact:
-
- Novice
- Posts: 37
- Joined: Wed Jun 02, 2004 2:45 pm
- Location: Norwich
- Contact:
-
- Novice
- Posts: 37
- Joined: Wed Jun 02, 2004 2:45 pm
- Location: Norwich
- Contact:
-
- Novice
- Posts: 37
- Joined: Wed Jun 02, 2004 2:45 pm
- Location: Norwich
- Contact:
-
- Adept
- Posts: 51
- Joined: Sat Jan 10, 2004 4:25 pm
- Contact:
My xbox with the 128mb mod just arrived and its w00000000t
The performance in Linux increased dramatically
Native installation on my 64mb xbox took about 4 hours, on the 128mb xbox it took less than 30minutes AND i can use kde with good speed
i recommend every linuxuser to make this 128mb mod
and by the way, my last post was 1337
The performance in Linux increased dramatically
Native installation on my 64mb xbox took about 4 hours, on the 128mb xbox it took less than 30minutes AND i can use kde with good speed
i recommend every linuxuser to make this 128mb mod
and by the way, my last post was 1337
64Mb RAM Module Shipping/cost for Norway
Where can I get the upgrade here in Norway_ Or what would it cost me inc. shipping to Norway from dealer?_I really need it, and can handle an iron. are there diff ram for diff boxes_ mine is 1.1
-ChiRon
if u have semi good soldering skills just do it urself like i am doing. buy the chips from someone and do it urself! the worst that can happen is two contacts short and ur xbox FRAG's, just get some solder sucker and pull it up and ur back to normal
-xbox v 1.1
-xecuter 2.3b pro
-xecuter bios build 4981
-160 gig hd
-4 controllers
-LAN
-Halo
-xecuter 2.3b pro
-xecuter bios build 4981
-160 gig hd
-4 controllers
-LAN
-Halo
it's worth every penney
I found 4 memory modules about half a year ago and soldered them in myself.
It's the best mod for the xbox that I did. You have to have a pair of steady hands and take your time. I actually had some solder bridges and my xbox first did not boot, but after looking through a microscope I found them and everything is just great with 128 MB of RAM the only way to run kde on the xbox.
I use the xbox for slide viewing over the network and DVD playing and of corse sometimes for playing.
Guenter
It's the best mod for the xbox that I did. You have to have a pair of steady hands and take your time. I actually had some solder bridges and my xbox first did not boot, but after looking through a microscope I found them and everything is just great with 128 MB of RAM the only way to run kde on the xbox.
I use the xbox for slide viewing over the network and DVD playing and of corse sometimes for playing.
Guenter
Iwe been planning to do this.. and yes there are tutorials
http://www.xbox-scene.com
and then theres even som video tutorials (on i remember on xbox-linux.org's wiki pages)
http://www.xbox-scene.com
and then theres even som video tutorials (on i remember on xbox-linux.org's wiki pages)