xserver fails
xserver fails
well here are some errors:
Xbox ~ # startx
xauth: creating new authority file /root/.serverauth.3891
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.4.34.2-gentoox i686
Current Operating System: Linux Xbox 2.4.34.2-gentoox #1 Sun Apr 15 18:50:01 BST 2007 i686
Build Date: 14 May 2007
Before reporting problems, check
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 14 19:15:05 2007
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules//vnc.so: undefined symbol: XkbInitialMap
(EE) Failed to load /usr/lib/xorg/modules//vnc.so
(EE) Failed to load module "vnc" (loader failed, 7)
(EE) Failed to load module "nvxbox" (module does not exist, 0)
(EE) Failed to load module "rfbkeyb" (module does not exist, 0)
(EE) Failed to load module "rfbmouse" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
yeah, remember that is after running magic successfully twice no idea why it's not working. All i can give you is information. the clock is set correctly, and i have a 1.6b xbox. Which means i have an xcalibur encoder. This gives me the following configuration options:
PAL
composite > 640x480 > NTSC > I choose NTSC cause that is what my dashboard and eeprom and everything else is set to.
HDTV > I have never chosen HDTV because i don't have one so i don't know the options
ok so yeah.
Xbox ~ # startx
xauth: creating new authority file /root/.serverauth.3891
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.4.34.2-gentoox i686
Current Operating System: Linux Xbox 2.4.34.2-gentoox #1 Sun Apr 15 18:50:01 BST 2007 i686
Build Date: 14 May 2007
Before reporting problems, check
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 14 19:15:05 2007
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib/xorg/modules//vnc.so: undefined symbol: XkbInitialMap
(EE) Failed to load /usr/lib/xorg/modules//vnc.so
(EE) Failed to load module "vnc" (loader failed, 7)
(EE) Failed to load module "nvxbox" (module does not exist, 0)
(EE) Failed to load module "rfbkeyb" (module does not exist, 0)
(EE) Failed to load module "rfbmouse" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
yeah, remember that is after running magic successfully twice no idea why it's not working. All i can give you is information. the clock is set correctly, and i have a 1.6b xbox. Which means i have an xcalibur encoder. This gives me the following configuration options:
PAL
composite > 640x480 > NTSC > I choose NTSC cause that is what my dashboard and eeprom and everything else is set to.
HDTV > I have never chosen HDTV because i don't have one so i don't know the options
ok so yeah.
Managed to get it a little closer. Seems when nvxbox driver is created, it's called nvxbox_drv.o and X is looking for nvxbox_drv.so. I made a link from .so to .o and it at least seems to start X. Don't have VNC (see the other errors above...) and it's not hooked up to a TV so I can't tell if it's actually running or not.
After giving up on a native install with home 6.2 i decided to go back to home 6.1 & after a magic i`m now stuck with the same error
I`m tempted to bung resctoox in & try & rename that file.
( if I can find it )
bLiGhTy.
Sorry to be a pain but how did you do that?clpalmer wrote:Managed to get it a little closer. Seems when nvxbox driver is created, it's called nvxbox_drv.o and X is looking for nvxbox_drv.so. I made a link from .so to .o and it at least seems to start X. Don't have VNC (see the other errors above...) and it's not hooked up to a TV so I can't tell if it's actually running or not.
I`m tempted to bung resctoox in & try & rename that file.
( if I can find it )
bLiGhTy.
2x xbox v1.0 gentoox home native
2x stock 10GB`s (both built for free )
Thanks 2 cheesyboofs, Steinar T & of course ShALLaX.
Falcon; jtag, xbr, 160gb hdd
2x stock 10GB`s (both built for free )
Thanks 2 cheesyboofs, Steinar T & of course ShALLaX.
Falcon; jtag, xbr, 160gb hdd
By "latest" do you mean 1.2 or 1.3? I've tried both with no success. I even spoke with the guy who does xf4vnc and he said the CVS sources should work if compiled with 1.3 and again no =/
blighty: do a "locate nvxbox_drv" and it should show you where the video driver is. You'll see it's labelled nvxbox_drv.o. Change to that directory (should be /usr/lib/modules/drivers or /usr/lib/xorg/modules/drivers or something of the like) and run "ln -s nvxbox_drv.o nvxbox_drv.so" and X should start ok. You still won't have VNC, but it'll stop bailing out with the "no screens found" thing.
blighty: do a "locate nvxbox_drv" and it should show you where the video driver is. You'll see it's labelled nvxbox_drv.o. Change to that directory (should be /usr/lib/modules/drivers or /usr/lib/xorg/modules/drivers or something of the like) and run "ln -s nvxbox_drv.o nvxbox_drv.so" and X should start ok. You still won't have VNC, but it'll stop bailing out with the "no screens found" thing.
Thanks just trying it now.clpalmer wrote: blighty: do a "locate nvxbox_drv" and it should show you where the video driver is. You'll see it's labelled nvxbox_drv.o. Change to that directory (should be /usr/lib/modules/drivers or /usr/lib/xorg/modules/drivers or something of the like) and run "ln -s nvxbox_drv.o nvxbox_drv.so" and X should start ok. You still won't have VNC, but it'll stop bailing out with the "no screens found" thing.
edit.
didn`t work but I bet it`s me that`s doing something wrong
I did
Code: Select all
locate nvxbox_drv
cd /usr/lib/modules/drivers
ln -s nvxbox_drv.o nvxbox_drv.so
halt
edit2
decided i`d better try
Code: Select all
cd /usr/lib/xorg/modules/drivers
ln -s nvxbox_drv.o nvxbox_drv.so
reboot
bLiGhTy.
2x xbox v1.0 gentoox home native
2x stock 10GB`s (both built for free )
Thanks 2 cheesyboofs, Steinar T & of course ShALLaX.
Falcon; jtag, xbr, 160gb hdd
2x stock 10GB`s (both built for free )
Thanks 2 cheesyboofs, Steinar T & of course ShALLaX.
Falcon; jtag, xbr, 160gb hdd
-
- Newbie
- Posts: 5
- Joined: Tue Jan 23, 2007 9:56 pm
- Location: Kassel, Germany
- Contact: