Cobalt Qube

Anything that doesn't fit into the other categories goes here - even non-Gentoox related posts can go here! Keep it clean, no flaming!
Post Reply
User avatar
BigBowser
Novice
Posts: 20
Joined: Wed Jan 12, 2005 2:35 pm
Location: France
Contact:

Cobalt Qube

Post by BigBowser » Sun Feb 05, 2006 8:01 pm

Hi Shallax, it's me again

I saw that you've got a Qube2 and I'd like to know where you bought it? (I searched on Sun's homepage but I found only specifications..)

Thanks,
-BigBowser
Modérateur Forum Ominfo.com
Image

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Mon Feb 06, 2006 12:24 am

They dont make them anymore (havent done so for years)... you'll have to get them second hand.

I'm also starting to think it wasn't such a good buy - the drivers for the network adaptors (tulip) suck, you cant get more than 1.5MBps through them and they keep locking up.
The original Xbox adaptation of Gentoo

User avatar
BigBowser
Novice
Posts: 20
Joined: Wed Jan 12, 2005 2:35 pm
Location: France
Contact:

Post by BigBowser » Mon Feb 06, 2006 7:09 am

Ook :?
I forget the idea.. Wasn't Cobalt sufficient? (yea I knew that all people from SunOS migrate to Linux but even on routers? :lol: )

I saw that these drivers aren't in devel because of montains of versions of 2.4 and 2.6 kernel.. But as Sun did, you can use 2.2 kernel, if you didn't alrealy do that.
Modérateur Forum Ominfo.com
Image

orochi
Gentoox Guru!
Posts: 606
Joined: Sun Oct 24, 2004 8:11 am

Post by orochi » Mon Feb 06, 2006 11:25 am

ebay.com would be the most common place to find a Qube2/Raq2.


@Shallax, What kernel version are you running, ive heard a few different kernel versions work with no hangups in the tulip driver (although I havent tested this yet, my raq2 is still in the mail :\


http://www.linux-mips.org/archives/linu ... 00324.html

patches for 2.4.24 kernel

http://www.colonel-panic.org/cobalt-mips/

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Mon Feb 06, 2006 2:31 pm

I'm using 2.6.16-rc1, I havent tried 2.4, but I guess its worth the gamble.
The original Xbox adaptation of Gentoo

User avatar
BigBowser
Novice
Posts: 20
Joined: Wed Jan 12, 2005 2:35 pm
Location: France
Contact:

Post by BigBowser » Mon Feb 06, 2006 3:35 pm

As I said, on their official support, Tulip drivers are known to work very well only with 2.2 kernel.. a big jump in the past
Modérateur Forum Ominfo.com
Image

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Mon Feb 06, 2006 5:04 pm

Well, 2.4 seems to be running better. I can get 2.5MBps though the NIC compared to 2.6 which only allowed about 1.5MBps. I'll see how it holds up for stability now.
The original Xbox adaptation of Gentoo

orochi
Gentoox Guru!
Posts: 606
Joined: Sun Oct 24, 2004 8:11 am

Post by orochi » Mon Feb 06, 2006 8:15 pm

yes, keep us informed ;D

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Mon Feb 06, 2006 11:06 pm

Doesn't look promising - I keep getting corrupt downloads.

I have a horrible feeling I'm going to have to buy a "commercial" router.
The original Xbox adaptation of Gentoo

orochi
Gentoox Guru!
Posts: 606
Joined: Sun Oct 24, 2004 8:11 am

Post by orochi » Tue Feb 07, 2006 10:53 pm

maybe it only craps out when you use both bulit in NIC's? Perhaps use one onboard NIC and slap one in the PCI slot to help fix the issue if you wanna stray away from the commercial routers?

[EDIT: should prolly post the link]

http://lists.debian.org/debian-mips/200 ... 00009.html

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Wed Feb 08, 2006 1:35 pm

I thought of that, but dont have the money to test out the theory.

The good news, however, is that its been running for about 2 days with 2.4.24-pre2 with no lockups so far!
The original Xbox adaptation of Gentoo

orochi
Gentoox Guru!
Posts: 606
Joined: Sun Oct 24, 2004 8:11 am

Post by orochi » Thu Feb 09, 2006 7:13 am

What patches did you apply to 2.4.24-pre2?

Both those from CoLo site? None? Inquiring minds want to know :D

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Sun Feb 12, 2006 1:02 am

Just the 2.4.24 patches.

The thing has locked up twice on me since (over the past 6 days). As a last resort I'm going to try and go back to the original Cobalt OS. If that doesn't work or doesn't suit me its bye-bye time for Mr Qube.
The original Xbox adaptation of Gentoo

orochi
Gentoox Guru!
Posts: 606
Joined: Sun Oct 24, 2004 8:11 am

Post by orochi » Sun Feb 12, 2006 8:58 am

http://groups.google.com/group/linux.de ... d5c15f0674

some report no probs with 2.4.27-r5k-cobalt 2.4.27-8.040815-1 (same as 2.4.27-8?) but problems with 2.4.27-10*

and even a patches for 2.4.31 at
http://www.twistedslinky.org/~link/
http://groups.google.com/group/linux.de ... 318a7c805e

tho cant find if they are talking 1nic or 2

[EDIT]
Meh, maybe 2 on board NIC's just wont fly

http://lists.debian.org/debian-mips/200 ... 00033.html

although i cant begin to understand what they mean by editing the patches of which they speak
http://svn.debian.org/wsvn/kernel/trunk ... sc=0&all=1


If your still looking to add a PCI nic, slap up a paypal link and ill donate :D

User avatar
ShALLaX
Site Admin
Posts: 1973
Joined: Sun Aug 10, 2003 9:25 pm
Location: England
Contact:

Post by ShALLaX » Sun Feb 12, 2006 11:10 pm

Paypal link has always been on the main gentoox website. I dont think I'll risk the PCI NIC, though - I'd rather just get a commercial router now... one that I can rely on. Any donations from now will go towards that (unless someone wants to find me another tiny linux-capable box with two integrated NICs).

Thanks!
The original Xbox adaptation of Gentoo

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest