Accessing an internal ftp server over the web.

Anything that doesn't fit into the other categories goes here - even non-Gentoox related posts can go here! Keep it clean, no flaming!
Post Reply
Posts: 8
Joined: Fri Jul 29, 2005 6:22 am

Accessing an internal ftp server over the web.

Post by mbroadhead » Tue Sep 27, 2005 4:55 am

Ok I have a ftp server set up with an internal ip address of; I know what my external ip address is, that is the one that my router accepts, coming from the cable modem...My question is, how do I access the ftp server from a remote computer, not on my local network? :?:

User avatar
Power user
Posts: 239
Joined: Wed Jan 26, 2005 1:32 pm
Location: Luton UK

Post by cheesyboofs » Tue Sep 27, 2005 12:47 pm

You need to map port 21 on your routers wan port (the bit that plugs in to the wall) to your computers ip address on the lan side ( it will be in your routers manual under something like ‘virtual servers’ or something.
Go fully native, it's the destiny of all Mk1 XboxesImage
The needs of the many out way the needs of the few or the one ...

User avatar
Power user
Posts: 288
Joined: Sat Jan 29, 2005 6:38 pm

Post by clpalmer » Tue Sep 27, 2005 5:01 pm

I've also seen it called "Port Forwarding", "Special Applications", "Remote Sites" and a few other terms. There's a good site that lists a ton of routers and how to configure them for various services.

Posts: 1
Joined: Thu Aug 31, 2006 10:35 pm


Post by adash » Thu Aug 31, 2006 10:41 pm

i have the same problem but i have a SpeedStream 4200 dsl modem, and that is connected to a D-Link DI-524 Wireless Router and I have a NAS attached to the wireless router. The NAS has a built in ftp server, how can i access this from an external computer (ftp server), i'm stuck don't know if i have to configure both the wireless router and the modem for this to happen. any help would be greatly appeciated.......

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests