cp -av /mnt/loopback/* /mnt/hda2 blows up!
cp -av /mnt/loopback/* /mnt/hda2 blows up!
I am following your guide and when I try:
cp -av /mnt/loopback/* /mnt/hda2
I get an error about option v not supported. When I try again with:
cp -a /mnt/loopback/* /mnt/hda2
It runs for awhile and blows up with:
Journal-601. buffer write failed.
kernal bug at prints.c:341!
invalid operand:0000
followed by a bunch of hex code.
cp -av /mnt/loopback/* /mnt/hda2
I get an error about option v not supported. When I try again with:
cp -a /mnt/loopback/* /mnt/hda2
It runs for awhile and blows up with:
Journal-601. buffer write failed.
kernal bug at prints.c:341!
invalid operand:0000
followed by a bunch of hex code.
There's a couple people getting the same errors with the latest releases over FTP installs. The only solution I've found is to slowly copy the file system over bit by bit and if it fails, restart, remove what was being copied and try again =/ Took me a long time to get Home copied over (Pro went much faster).
is this the right commands to copy the folders?
mkdir /mnt/hda2/bin && cp -a /mnt/loopback/bin/* /mnt/hda2/bin
mkdir /mnt/hda2/boot && cp -a /mnt/loopback/boot/* /mnt/hda2/boot
mkdir /mnt/hda2/dev && cp -a /mnt/loopback/dev/* /mnt/hda2/dev
mkdir /mnt/hda2/etc && cp -a /mnt/loopback/etc/* /mnt/hda2/etc
mkdir /mnt/hda2/home && cp -a /mnt/loopback/home/* /mnt/hda2/home
mkdir /mnt/hda2/lib && cp -a /mnt/loopback/lib/* /mnt/hda2/lib
mkdir /mnt/hda2/lost+found && cp -a /mnt/loopback/lost+found/* /mnt/hda2/lost+found
mkdir /mnt/hda2/mnt && cp -a /mnt/loopback/mnt/* /mnt/hda2/mnt
mkdir /mnt/hda2/opt && cp -a /mnt/loopback/opt/* /mnt/hda2/opt
mkdir /mnt/hda2/proc && cp -a /mnt/loopback/proc/* /mnt/hda2/proc
mkdir /mnt/hda2/root && cp -a /mnt/loopback/root/* /mnt/hda2/root
mkdir /mnt/hda2/sbin && cp -a /mnt/loopback/sbin/* /mnt/hda2/sbin
mkdir /mnt/hda2/sys && cp -a /mnt/loopback/sys/* /mnt/hda2/sys
mkdir /mnt/hda2/tmp && cp -a /mnt/loopback/tmp/* /mnt/hda2/tmp
mkdir /mnt/hda2/usr && cp -a /mnt/loopback/usr/* /mnt/hda2/usr
mkdir /mnt/hda2/var && cp -a /mnt/loopback/var/* /mnt/hda2/var
mkdir /mnt/hda2/bin && cp -a /mnt/loopback/bin/* /mnt/hda2/bin
mkdir /mnt/hda2/boot && cp -a /mnt/loopback/boot/* /mnt/hda2/boot
mkdir /mnt/hda2/dev && cp -a /mnt/loopback/dev/* /mnt/hda2/dev
mkdir /mnt/hda2/etc && cp -a /mnt/loopback/etc/* /mnt/hda2/etc
mkdir /mnt/hda2/home && cp -a /mnt/loopback/home/* /mnt/hda2/home
mkdir /mnt/hda2/lib && cp -a /mnt/loopback/lib/* /mnt/hda2/lib
mkdir /mnt/hda2/lost+found && cp -a /mnt/loopback/lost+found/* /mnt/hda2/lost+found
mkdir /mnt/hda2/mnt && cp -a /mnt/loopback/mnt/* /mnt/hda2/mnt
mkdir /mnt/hda2/opt && cp -a /mnt/loopback/opt/* /mnt/hda2/opt
mkdir /mnt/hda2/proc && cp -a /mnt/loopback/proc/* /mnt/hda2/proc
mkdir /mnt/hda2/root && cp -a /mnt/loopback/root/* /mnt/hda2/root
mkdir /mnt/hda2/sbin && cp -a /mnt/loopback/sbin/* /mnt/hda2/sbin
mkdir /mnt/hda2/sys && cp -a /mnt/loopback/sys/* /mnt/hda2/sys
mkdir /mnt/hda2/tmp && cp -a /mnt/loopback/tmp/* /mnt/hda2/tmp
mkdir /mnt/hda2/usr && cp -a /mnt/loopback/usr/* /mnt/hda2/usr
mkdir /mnt/hda2/var && cp -a /mnt/loopback/var/* /mnt/hda2/var
Hmm. I haven't seen any issues of the like since I got both my Home and Pro boxes up and running. The only time I've seen it is copying from the fatx mounted rootfs file.
Are you running fatx on a partition that was being used at all when you saw the message orochi? Wonder if it's just a fatx thing...
Are you running fatx on a partition that was being used at all when you saw the message orochi? Wonder if it's just a fatx thing...
-
- Power user
- Posts: 239
- Joined: Wed Jan 26, 2005 1:32 pm
- Location: Luton UK
- Contact:
I would be curious to know if you are all using ext3 as Reiserfs support had to be dropped because apparently its so flaky? I did a native install on bios 6.7 with pro 4.2 on a ext3 200Gb Disk what are you lot using?
Go fully native, it's the destiny of all Mk1 Xboxes
The needs of the many out way the needs of the few or the one ...
The needs of the many out way the needs of the few or the one ...