Page 1 of 1
'image.bin' not found?!?
Posted: Tue Aug 30, 2005 7:40 pm
by dsltech_dude
Hey everyone,
I'm trying to install Gentoox on my xbox by flashing the TSOP and then formating the HDD for Linux. I can get the CDR to bootup, but when I go to the flash menu, and select flash. It says 'image.bin' not found. The default .bin is named Loader, so I renamed it and still got the same message. Can I flash the TSOP using the 007auf raincoat savegame. Then I should just be able to pop in the disc and let it format the whole HDD for linux instead of FATX correct?
And if I screw up, I can't use the rescue disc to flash, so any other suggestions?
Thanks,
DSLTech_Dude
Posted: Wed Aug 31, 2005 10:50 pm
by dsltech_dude
NVM,
Just flashed using raincoat and the Cromwell BIOS, boots up perfectly now.
I just hope I can reflash if I ever need to.
Thanks,
DT_Dude
the same but diferent
Posted: Wed Sep 21, 2005 6:01 pm
by Arkano
Hey!
I have the same problem with the image.bin file, but i dont want to fix it with the 007 exploit, its posible to fixed it via ftp or something like that? i tried also to put the hd on my pc but i cannot make ir run.
Anyone can help me?
Thanks!
Posted: Thu Sep 22, 2005 9:25 am
by ShALLaX
You need to make a totally new CD with ONLY a file named "image.bin" on it burned as an iso9660 compliant disc. You then put this disc in the drive after Gentoox Loader has booted up then select the CD flashing option.
dont work
Posted: Thu Sep 22, 2005 1:56 pm
by Arkano
Hi again! and thanks for the reply!
I tryed to record as you said to me before, even i tryed with different cdrw, different speeds, diferent bios... nothing :S
Is possible to put the hd on my pc and change the files from there (the hd is not the original) or via ftp?
thank u so much
Posted: Thu Sep 22, 2005 2:06 pm
by ShALLaX
You can do it via the network flash. Try reading the Gentoox Loader manual its all detailed in there.
Posted: Fri Sep 23, 2005 9:35 pm
by Arkano
thank u very much!
so so dificult
Posted: Tue Sep 27, 2005 1:48 pm
by Arkano
Hi again!
Im stuck in the same point, i cannot start the installation...
I tryed by net flash ... nothing
ssh ... nothing
ftp ... (the ftp tutorial is a joke?) nothing
so i used this config to connect:
my pc:
192.168.1.12 ip
255.255.255.0
192.168.1.1 gateway
and the xbox is 192.168.1.13
the only thing that i can do is to access via http to the xbox bios page
so, what i do bad? and if nobody knows, how can i put a normal 256 bios (maybe the original?) to have normal access to my xbox?
sorry for the inconveniences and thanks a lot!!!!
Posted: Tue Sep 27, 2005 1:57 pm
by ShALLaX
The FTP tutorial assumes you are running an FTP server, which you arent. Also, there's no SSH server in Cromwell.
The HTTP page you can access _IS_ the netflash page.