Magic X.Org Upgrade failing at XServer Path
Magic X.Org Upgrade failing at XServer Path
Hi All,
I tried to update my system with magic. But afer libtool is emerged the script fails with the following message
*************
Emerge failed.
xserver patch failed.
Check your network settings and try again.
*************
Network Settings are OK, emerge sync has been done today, Clock is set by NTP.
Any idea, is there a log I can check?
Cheers
Faser
I tried to update my system with magic. But afer libtool is emerged the script fails with the following message
*************
Emerge failed.
xserver patch failed.
Check your network settings and try again.
*************
Network Settings are OK, emerge sync has been done today, Clock is set by NTP.
Any idea, is there a log I can check?
Cheers
Faser
Xorg patch failed for me, too. So I completely deleted/ uninstalled Gentoox and reinstalled from the beginning. The Xorg patch worked then. Fortunately I had taken notes on most of my settings, network settings, etc.
I don't know if there is a way to make the patch work without re-installing, as nobody responded to my earlier post, and I don't have the time to devote to becoming a Linux expert.
I don't know if there is a way to make the patch work without re-installing, as nobody responded to my earlier post, and I don't have the time to devote to becoming a Linux expert.
-
- Pro
- Posts: 93
- Joined: Mon Nov 17, 2003 9:45 am
- Location: Canada
Hi Vplayer,
thanks for help to find reasons. My Internet Connectivity could not have died as I access the internet via my firewall which had an IPSEC tunnel which haven't reloaded.
I am not sure how I can tell you what kind of Gentoox Installation I have.
dmesg shows: Linux version 2.4.22-xbox (root@Xbox) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice))
/dev/hda2 is mounted to / and has 29GB free
Magic tells
You are running Gentoox Home 3.0
--------------------------------------------------------------------
Gentoox is distributed under the GNU General Public License.
Patch serial: 20050201008
wget: wget -T 30 -t 5
+ Gentoox Loader v5.4.
+ Xorg support.
+ magic f-drive and magic e-drive removed. See website.
I say
sync: no (already synced before starting magic)
xserver: yes
kde: no
Magic then does an emerge libtool (which if I do it by hand works smoothly)
And then after libtool is installed I get
Emerge failed.
xserver patch failed.
Check your network settings and try again.
Magic encountered the above error, please try again later.
I hope that gives you an idea what I have.
Cheers
Frederik
thanks for help to find reasons. My Internet Connectivity could not have died as I access the internet via my firewall which had an IPSEC tunnel which haven't reloaded.
I am not sure how I can tell you what kind of Gentoox Installation I have.
dmesg shows: Linux version 2.4.22-xbox (root@Xbox) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice))
/dev/hda2 is mounted to / and has 29GB free
Magic tells
You are running Gentoox Home 3.0
--------------------------------------------------------------------
Gentoox is distributed under the GNU General Public License.
Patch serial: 20050201008
wget: wget -T 30 -t 5
+ Gentoox Loader v5.4.
+ Xorg support.
+ magic f-drive and magic e-drive removed. See website.
I say
sync: no (already synced before starting magic)
xserver: yes
kde: no
Magic then does an emerge libtool (which if I do it by hand works smoothly)
And then after libtool is installed I get
Emerge failed.
xserver patch failed.
Check your network settings and try again.
Magic encountered the above error, please try again later.
I hope that gives you an idea what I have.
Cheers
Frederik
-
- Newbie
- Posts: 3
- Joined: Sun Feb 06, 2005 3:13 pm
Xorg patch fails
Hi,
I have the same problem emerging xorg-x11, either by running magic or emerging manually. 'emerge xorg-x11' fails with the following error:
In the .out file it says:
Since I have no idea where portage leaves the rejects (they where gone) I did a 'ebuild xorg-x11-... fetch unpack' and applied the patches myself, and the patch failed again, with the following rejects:
The mach64 lines are missing
Strange, because it worked yesterday on the very same xbox? As a side node, that was *before* 'emerge -u world' completely borked my beautiful gentoox installation by 'downgrading' almost every package on my system, effectively removing binutils, bash etc. Still not sure how that happened, probably because I switched a fully loaded system to the default-linux/x86/xbox profile...
Anyway, I'm off trying to run magic again, editing the patch before it gets applied, and if that works we have a fix
John Betonschaar
I have the same problem emerging xorg-x11, either by running magic or emerging manually. 'emerge xorg-x11' fails with the following error:
Code: Select all
* Failed Patch: 9990_x86_6.8.0-xbox-20041024.patch!
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/xorg-x11-6.8.0-r4/temp/9990_x86_6.8.0-xbox-20041024.patch-29379.out
Code: Select all
patching file xc/config/cf/xorg.cf
Hunk #7 FAILED at 512.
Hunk #8 succeeded at 563 (offset 4 lines).
Hunk #9 succeeded at 590 (offset 4 lines).
Hunk #10 succeeded at 622 (offset 4 lines).
Hunk #11 succeeded at 651 (offset 4 lines).
Hunk #12 succeeded at 1584 (offset 4 lines).
1 out of 12 hunks FAILED -- saving rejects to file xc/config/cf/xorg.cf.rej
Code: Select all
***************
*** 608,617 ****
#endif
- #ifndef DevelDRIDrivers
- #define DevelDRIDrivers mach64
- #endif
-
/* Sparc64 Drivers */
#if defined(OpenBSDArchitecture) && defined(Sparc64Architecture)
/* Amiga framebuffer module */
--- 512,517 ----
#endif
/* Sparc64 Drivers */
#if defined(OpenBSDArchitecture) && defined(Sparc64Architecture)
/* Amiga framebuffer module */
Strange, because it worked yesterday on the very same xbox? As a side node, that was *before* 'emerge -u world' completely borked my beautiful gentoox installation by 'downgrading' almost every package on my system, effectively removing binutils, bash etc. Still not sure how that happened, probably because I switched a fully loaded system to the default-linux/x86/xbox profile...
Anyway, I'm off trying to run magic again, editing the patch before it gets applied, and if that works we have a fix
John Betonschaar
-
- Newbie
- Posts: 3
- Joined: Sun Feb 06, 2005 3:13 pm
Xorg patch fails - fixed
Yup this solves it for me: in the 9990-xbox-.. patch file remove the following lines:
They're at lines 245 to 255 in the patch file I got when magic emerges xorg-x11-6.8.0-r4.
I copied the modified patch file to a temporary directory, ran magic again, waited until it started applying the xorg patches and before it got to the xbox patch I copied the modified patch over the one in /var/tmp/portage/xorg-x11-6.8.0-r4/work/patch. Emerging xorg as we speak...
Maybe the patch needs fixing?
l8er,
John Betonschaar
Code: Select all
@@ -608,10 +512,6 @@
#endif
-#ifndef DevelDRIDrivers
-#define DevelDRIDrivers mach64
-#endif
-
/* Sparc64 Drivers */
#if defined(OpenBSDArchitecture) && defined(Sparc64Architecture)
/* Amiga framebuffer module */
I copied the modified patch file to a temporary directory, ran magic again, waited until it started applying the xorg patches and before it got to the xbox patch I copied the modified patch over the one in /var/tmp/portage/xorg-x11-6.8.0-r4/work/patch. Emerging xorg as we speak...
Maybe the patch needs fixing?
l8er,
John Betonschaar