Ok after clean install MCE 1.1 on G partition, i go for install apache as i only miss that to have all working for me.
they sey i need to first "emerge --sync" so i did as root that. Here is finishing line off all things that are working for 5h:
wrote 107265 bytes read 8373835 bytes 3002.69 bytes/sec
total size is 86010118 speedup is 10.14
>>> Updating Portage cache... ...done!
Performing Global Updates: /usr/portage/profiles/updates/3Q-2002
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
........................................................................................
Performing Global Updates: /usr/portage/profiles/updates/4Q-2002
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
................................................................................
Performing Global Updates: /usr/portage/profiles/updates/1Q-2003
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
..........................
Performing Global Updates: /usr/portage/profiles/updates/2Q-2004
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
..................................................................................................
Performing Global Updates: /usr/portage/profiles/updates/3Q-2004
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
Performing Global Updates: /usr/portage/profiles/updates/4Q-2004
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
...........
Performing Global Updates: /usr/portage/profiles/updates/1Q-2005
(Could take a couple minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move'
..@.............................................................
!!! /etc/make.profile is not a symlink and will probably prevent most merges.
!!! It should point into a profile within /usr/portage/profiles/
!!! (You can safely ignore this message when syncing. It's harmless.)
* An update to portage is available. It is _highly_ recommended
* that you update portage now, before any other packages are updated.
* Please do so and then update ALL of your configuration files.
root@MediaCenter #
I dont know to which profile i need to make that symlink. I am trying all )
!!! /etc/make.profile is not a symlink and will probably prevent most merges.
!!! It should point into a profile within /usr/portage/profiles/
!!! (You can safely ignore this message when syncing. It's harmless.)
!!! ARCH is not set... Are you missing the /etc/make.profile symlink?
!!! Is the symlink correct? Is your portage tree complete?
MediaCenter etc #
What i am missing here ppl i need your help, this is my first install of gentoox completly before i only install gentoox and stop there.
Thnx to all
Last edited by crow on Thu Feb 10, 2005 4:25 pm, edited 1 time in total.
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1
!!! /etc/make.profile is not a symlink and will probably prevent most merges.
!!! It should point into a profile within /usr/portage/profiles/
!!! (You can safely ignore this message when syncing. It's harmless.)
!!! ARCH is not set... Are you missing the /etc/make.profile symlink?
!!! Is the symlink correct? Is your portage tree complete?
root@MediaCenter #
I dont know what i am doing wrong, is my "emerge --sync" wrong or. It take about 5h and its long ) hope i will not need to do this again.
Here is ls of that folder that you SHallax post:
root@MediaCenter # ls /usr/portage/profiles/default-linux/x86/2004.0
make.defaults make.profile packages parent
root@MediaCenter #
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1
But where to link that /etc.make.profile what is default symlink on MCE ...
root@MediaCenter etc # ln -s /usr/portage/profiles/default-linux/x86/2004. /etc/make.profile
2004.0 2004.2 2004.3
root@MediaCenter etc # ln -s /usr/portage/profiles/default-linux/x86/2004.0 /etc/make.profile
root@MediaCenter etc # emerge mod_php mod_ssl mod_perl php perl !!! 'str' object has no attribute 'insert'
!!! 'rm -Rf /usr/portage/profiles; emerge sync' may fix this. If it does
!!! not then please report this to bugs.gentoo.org and, if possible, a dev
!!! on #gentoo (irc.freenode.org)
root@MediaCenter etc #
Now other problems, and that solution i dont like )) i hope i will not need to make "emerge --sync" again on this shiti dial-up connection.
Thnx to all
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1
Ok ),
Now i see that del all sync before and that i need sync do again ( (i am on dial-up). Could i download portage manual and install and use it.
I download portage-20050207.tar.bz2 18mb. can i unpack them to portage directory that you put above?
like:
tar xvjf /path/to/portage-20050207.tar.bz2 -C /usr/portage/profiles/default-linux/x86/2004.0/
and then "emerge metadata" and then finaly to emerge apache php etc...
Or how to install manual that porage and use it, doesnt matther how long it will take only that i dont be on Internet with shity connection.
Thnx[/quote][/code]
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1
as this file is already in portage directory. After that i do
root@MediaCenter # emerge metadata
!!! 'str' object has no attribute 'insert'
!!! 'rm -Rf /usr/portage/profiles; emerge sync' may fix this. If it does
!!! not then please report this to bugs.gentoo.org and, if possible, a dev
!!! on #gentoo (irc.freenode.org)
root@MediaCenter # rm -Rr /usr/portage/profiles
root@MediaCenter # emerge metadata
skipping sync
>>> Updating Portage cache... ...done!
* An update to portage is available. It is _highly_ recommended
* that you update portage now, before any other packages are updated.
* Please do so and then update ALL of your configuration files.
Now whatever i try i get /etc/make.profile not good...
root@MediaCenter # emerge -u portage
!!! ARCH is not set... Are you missing the /etc/make.profile symlink?
!!! Is the symlink correct? Is your portage tree complete?
root@MediaCenter #
This mybe wrong what i am doing, but i cant be more then 1h on internet because my connection die, so sync die to and all over again.
Thnx[/code]
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1
Your problem now is that you have deleted your portage profiles. Do an emerge sync again. It won't take very long this time as you have most of the files there already. When that is finished you might have to recreate your profiles symlink.
Ok i finaly menaged to install snapshot.
BUt i am confused to which profile need to link /etc/make.profile
SHallax sey one, you sey other what is right profile.
THnx
XBoX Crystal Edition rev 1.4
Smartxx v2 Helloween Edition : Smartxx OS 3331
HDD 160Gb ST3160023A Seagate
DVD ROM PHILIPS J5 3235C
Gentoox MCE 1.1